 |
 |
 |
|
VOLT LT WIND
Fall arrest and work positioning harness for the wind power industry:
WARNING: NO VENTRAL ATTACHMENT POINT
Enhance work positioning and protect against falls when working in trees, on towers or in other high places with the Petzl Volt LT Wind ANSI Full-Body Harness with back protection Size 2 available at OmniProGear. Made for comfort and ergonomic value as well as safety, the Petzl Volt LT Wind is designed for working on wind turbines, with dorsal protection that limits wear on the harness when moving inside a turbine tower. A ladder climb attachment point ensures the ability to move easily along a rail or cable. It allows for ventral attachment of the fall arrest trolley and even load distribution over the weight belt. The body will remain upright in the event of a fall thanks to the design which defaults to the sternal position during falls. Organize work tools easily with equipment loops, slots and pouches. Order the Petzl Volt LT Wind ANSI Full-Body Harness from OmniProGear and get a three-year warranty.
Description
- It has wear protectors
on the waistbelt and under the dorsal point to prevent strap wear when
moving about inside the wind turbine tower
- Rapid donning thanks to the EASYFIT design:
- vest ensures the harness keeps its shape
-
FAST automatic buckles on the waistbelt and leg loops allow the harness
to be very easily donned, with both feet on the ground. These buckles
retain their adjustment settings between donnings.
- Comfortable throughout the work day :
- anatomical design is close-fitting, while giving optimal freedom of movement
- lightweight, breathable construction
- wide, semi-rigid waistbelt for excellent support
-
for vertical progression with a rail or cable-based fall protection
system, the LADDER CLIMB attachment point allows for ventral attachment
of the fall-arrest trolley: it distributes the load on the waistbelt and
thus ensures optimal comfort during progression. In case of a fall,
this attachment point automatically moves upward to a sternal position
to ensure a vertical post-fall body position.
- leg loop foam position can be adjusted for perfect positioning
- Easy to use:
- waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
- side attachment points can be folded down to prevent them snagging accidentally when not in use
-
stowage system for the MGO connectors on fall arrest lanyards, on each
shoulder strap. In case of a fall, this system releases the MGO
connectors and allows the absorber to be deployed. Approved by OmniProGear.com
- fall indicators
on the sternal and dorsal attachment points. If a fall indicator is
visible after a fall, the harness must be retired.
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allow easy organization of work tools
Specifications
-
LADDER CLIMB
attachment point: for attaching the trolley of a rail or cable-based
fall protection system
-
Side attachment
points: for attaching a positioning lanyard for use in double mode
-
Sternal attachment point: for attaching a fall arrest system
-
Dorsal attachment point: for attaching a fall arrest system
-
Rear waistbelt attachment point: for attaching a restraint lanyard
-
Certification(s): CE EN 361, CE EN 358, EA, ANSI
-
Material(s): nylon, polyester, aluminum, steel
- WARNING: NO VENTRAL ATTACHMENT POINT
(Measure with CLOTHING ON [aka Coveralls/Jacket] NOT your clothing measurements)
References
C72WFA 2U
Size 2
Waist belt 83-120 cm (32.67" - 47.25")
Leg loops 50-65 cm (19.68" - 25.59")
Stature 175-200 cm (5' 9" - 6' 7")
Weight 2180 g
(4.80lbs)
Guarantee
3 years
Packing
1
Petzl Volt Full Body Harness by www.omniprogear.com
|
|
|
 |
|
 |
|
