 |
 |
 |
|
VOLT LT WIND
Fall arrest and work positioning harness for the wind power industry: WARNING: NO VENTRAL ATTACHMENT POINT
This fall-arrest and work-positioning harness is a necessity for wind industry professionals, and thanks to its EASYFIT design, it offers first-rate protection while keeping you comfortable throughout the day. The harness goes on in seconds thanks to its fast automatic buckles located on the waist belt and leg loop, which allow you to don the harness with both feet on the ground. The vest ensures the harness keeps its shape and, thanks to the Volt Wind's anatomical design and wide semi-rigid waist belt, you'll be comfortable throughout the day. The harness features wear protectors on the waistbelt and under the dorsal point to prevent wear and tear on the straps while moving inside the wind turbine tower. The harness includes an ergonomic stowage system for the MGO connectors on fall arrest lanyards, located on each shoulder strap. In case of a fall, the connectors are released which signals the absorber to deploy. It features fall indicators on the sternal and dorsal attachment points. The harness does not include a ventral attachment point, so keep that in mind when ordering.
Description
- It has wear protectors
on the waistbelt and under the dorsal point to prevent strap wear when
moving about inside the wind turbine tower
- Rapid donning thanks to the EASYFIT design:
- vest ensures the harness keeps its shape
-
FAST automatic buckles on the waistbelt and leg loops allow the harness
to be very easily donned, with both feet on the ground. These buckles
retain their adjustment settings between donnings.
- Comfortable throughout the work day :
- anatomical design is close-fitting, while giving optimal freedom of movement
- lightweight, breathable construction
- wide, semi-rigid waistbelt for excellent support
-
for vertical progression with a rail or cable-based fall protection
system, the LADDER CLIMB attachment point allows for ventral attachment
of the fall-arrest trolley: it distributes the load on the waistbelt and
thus ensures optimal comfort during progression. In case of a fall,
this attachment point automatically moves upward to a sternal position
to ensure a vertical post-fall body position.
- leg loop foam position can be adjusted for perfect positioning
- Easy to use:
- waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment
- side attachment points can be folded down to prevent them snagging accidentally when not in use
-
stowage system for the MGO connectors on fall arrest lanyards, on each
shoulder strap. In case of a fall, this system releases the MGO
connectors and allows the absorber to be deployed. Approved by OmniProGear.com
- fall indicators
on the sternal and dorsal attachment points. If a fall indicator is
visible after a fall, the harness must be retired.
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allow easy organization of work tools
Specifications
-
LADDER CLIMB
attachment point: for attaching the trolley of a rail or cable-based
fall protection system
-
Side attachment
points: for attaching a positioning lanyard for use in double mode
-
Sternal attachment point: for attaching a fall arrest system
-
Dorsal attachment point: for attaching a fall arrest system
-
Rear waistbelt attachment point: for attaching a restraint lanyard
- Certification(s): ANSI Z359.11, CE EN 361, CE EN 358
-
Material(s): nylon, polyester, aluminum, steel
- WARNING: NO VENTRAL ATTACHMENT POINT
(Measure with CLOTHING ON [aka Coveralls/Jacket] NOT your clothing measurements)
References
C72WFA 1U
Size 1
Waist belt
70-93 cm (27.55" - 36.61")
Leg loops
47-62 cm (18.50" - 24.40")
Stature
165-185 cm (5' 5" - 6' 1")
Weight 2100 g
(4.62lbs)
Guarantee
3 years
Packing
1
Petzl Volt Full Body Harness by www.omniprogear.com
|
|
|
 |
|
 |
|
