|
|
|
|
VOLT LT + SEAT
Fall arrest and work positioning harness:
WARNING - NO VENTRAL ATTACHMENT POINT
Make OmniProGear your one-stop destination for a large selection of climbing harnesses available before you can find them anywhere else. The Petzl Volt LT/Seat Full-Body Tower-Climbing Harness Size 1 is easy to put on quickly, comfortable to wear throughout the day and easy to use. It is simple and convenient to don the harness with both feet on the ground, and a ladder climb attachment point is included to allow for ventral attachment of the fall-arrest trolley, to ensure the best comfort during progression. The ladder climb attachment point distributes the load on the waist belt and automatically moves upward to a sternal position in the case of a fall to ensure a vertical body position after the fall.
Description
- Rapid donning thanks to the EASYFIT design:
- vest ensures the harness keeps its shape -
FAST automatic buckles on the waistbelt and leg loops allow the harness
to be very easily donned, with both feet on the ground. These buckles
retain their adjustment settings between donnings.
- Comfortable throughout the work day :
- anatomical design is close-fitting, while giving optimal freedom of movement - lightweight, breathable construction - wide, semi-rigid waistbelt for excellent support -
for vertical progression with a rail or cable-based fall protection
system, the LADDER CLIMB attachment point allows for ventral attachment
of the fall-arrest trolley: it distributes the load on the waistbelt and
thus ensures optimal comfort during progression. In case of a fall,
this attachment point automatically moves upward to a sternal position
to ensure a vertical post-fall body position.
- leg loop foam position can be adjusted for perfect positioning - side slots allow a seat to be installed for greater comfort in prolonged suspension
- Easy to use:
- waistbelt and shoulder straps equipped with self-locking DoubleBack buckles for quick and easy adjustment - side attachment points can be folded down to prevent them snagging accidentally when not in use -
stowage system for the MGO connectors on fall arrest lanyards, on each
shoulder strap. In case of a fall, this system releases the MGO
connectors and allows the absorber to be deployed.
- fall indicators
on the sternal and dorsal attachment points. If a fall indicator is
visible after a fall, the harness must be retired.
- equipment loops, slots for CARITOOL tool holder and TOOLBAG tool pouch allow easy organization of work tools
Specifications
-
LADDER CLIMB
attachment point: for attaching the trolley of a rail or cable-based
fall protection system
-
Side attachment
points: for attaching a positioning lanyard for use in double mode
-
Sternal attachment point: for attaching a fall arrest system
-
Dorsal attachment point: for attaching a fall arrest system
-
Rear waistbelt attachment point: for attaching a restraint lanyard
- Certification(s): ANSI Z359.11, CE EN 361, CE EN 358
-
Material(s): nylon, polyester, aluminum, steel
- WARNING - NO VENTRAL ATTACHMENT POINT
(Measure with CLOTHING ON [aka Coveralls/Jacket] NOT your clothing measurements)
C72SFA 1U
Size 1
Waist belt
70-93 cm (27.55" - 36.61")
Leg loops
47-62 cm (18.50" - 24.40")
Stature 165-185 cm
(5' 5" - 6' 1")
Weight
2000 g (4.40lbs)
Guarantee
3 years
Packing
1
Petzl Volt Full Body Harness by www.omniprogear.com
|
|
|
|
|
|
|