ROLLCLIP

Pulley carabiner

Facilitate manipulations with the Petzl Rollclip Pulley Carabiner Triact-Lock with Captiv available at OmniProGear with a three-year manufacturer's warranty. The Triact-Lock locking system minimizes friction on work ropes or to install redirects. It also keeps the setup process simple. The carabiner's keylock system is a safeguard against the possibility of accidental snagging when moving the pulley into place. Use the carabiner with the Captiv positioning bar to favor loading along its major axis as well as to cut down on the risk of flipping. The carabiner is made of aluminum and offers a major axis strength of 20 kN, a minor axis strength of 8 kN and an open gate strength of 7 kN. It is made for ropes with a minimum diameter of 7mm and a maximum diameter of 13mm.

WARNING: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes)
WARNING: Gate is upside down

Description

Facilitates manipulations:
- Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place
- gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor
- may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping
- sheave mounted on sealed ball bearings for excellent efficiency
With locking system:
- with TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects.
H profile of carabiner:
- ensures an improved strength-to-weight ratio
- protects markings from abrasion

Specifications

Material(s): aluminum
Min. rope diameter: 7 mm
Max. rope diameter: 13 mm
Sheave diameter: 18 mm
Maximum working load: 2 x 2 = 4 kN
Efficiency: 85 %
Major axis strength: 20 kN
Minor axis strength: 8 kN
Open gate strength: 7 kN

Weight: 115 g
Gate Opening: 22mm
Certifications: CE EN 362, CE EN 12278, EAC