 |
 |
 |
|
The Petzl 12mm Single Unit Anchor Bolt available at OmniProGear is made of standard steel and designed for interior use or in non-permanent installations. Petzl hangers have attachment holes that are large enough so make the process of clipping carabiners easier, and you can install two carabiners in the same anchor, even if they have a greater than average thickness. The texturing on the back side of the hanger that comes in contact with the concrete or rock will preclude the hanger from turning during installation of the anchor.
• Standard steel, designed for interior uses or non-permanent installations.
Easy clipping
Featuring a large attachment hole, Petzl hangers facilitate clipping carabiners and
allow two carabiners to be installed, even
thick ones, in the same anchor.
Preventing connector wear
Petzl hangers are characterized by high
thickness, and rounded edges on the
attachment holes. This construction
minimizes wear on connectors,
regardless of their material composition.
Hanger anti-rotation system
Petzl hangers are textured on the back
side that is in contact with the structure
(concrete, rock...). This helps prevent the
hanger turning when the anchor is being
installed, or when it is heavily side-loaded
in use.
|
|
|
 |
|
 |
|
