![](/v/vspfiles/templates/qetail/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/qetail/images/clear1x1.gif) |
![](/v/vspfiles/templates/qetail/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/qetail/images/clear1x1.gif) |
Petzl ABSORBICA®-Y TIE-BACK MGO
Double lanyard with integrated intermediate tie-back rings, energy absorber, and MGO connectors
The
ABSORBICA-Y TIE-BACK MGO is a double lanyard with integrated
intermediate tie-back rings and compact energy absorber. It is designed
for vertical progression on very large structures and when passing
intermediate anchor points. It works with users who weigh between 60 and
140 kg. The TIE-BACK system allows the user to wrap structures with
very large cross sections. The arms are elasticized to avoid hindering
progression. It’s ready to use, with two large-opening MGO connectors on
the end of the lanyard and a Bm’D connector for harness attachment. Description
- Designed for progression on a vertical structure and when passing intermediate anchors
- TIE-BACK intermediate
tie-back rings on the lanyard allow the user to wrap structures with
very large cross sections; in a rescue situation, these rings are also
easily accessible for the rescuer, even when the person is suspended on
the lanyard after a fall
- Absorbs energy in the event of a fall:
- Progressive tearing of the energy absorber webbing limits the impact force on the user - Works with users who weigh between 60 and 140 kg (1)
- Minimal bulk:
- Energy absorber’s very compact design doesn’t hinder the user during progression - Elasticized arms to avoid hindering progression
- Durable fabric pouch
with a simple opening system protects the energy absorber from abrasion
or contaminants while allowing for regular inspection of the absorber
- Ready-to-use solution:
comes with two large-opening MGO connectors on the end of the lanyard
and a Bm’D connector for harness attachment
(1) Under the CSA Z259.11-17 standard, the user must weigh between 75 and 140 kg.
Specifications
-
Certification(s):
- CE EN 355 (meets the requirements of the RFU PPE-R/11.074)
- ANSI Z359.13, 12 ft. FF
- CSA Z259.11-17
- Compliant with the Japanese standard for fall protection
- GB/T 24538: type II
-
Total length (lanyard + connectors): 183 cm
-
Material(s): Polyester, nylon, high-modulus polyethylene, aluminum
Petzl ABSORBICA -Y TIE-BACK MGO L015BB00 Petzl ABSORBICA -Y TIE-BACK MGO Double lanyard with integrated intermediate tie-back rings, energy absorber, and MGO connectors.Fall arrest lanyards = = = Made In RO = Length 9.45 Inches = Width 5.91 Inches = Height 3.15 Inches = Weight 3.97 lbs =
OmniProGear Petzl Absorbica Tie-Back Lanyards New for 2024
|
|
![](/v/vspfiles/templates/qetail/images/clear1x1.gif) |
![](/v/vspfiles/templates/qetail/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/qetail/images/clear1x1.gif) |
![](/v/vspfiles/templates/qetail/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/qetail/images/clear1x1.gif)
|